Many electronic devices in our lives use LCD screens, so do you know what issues need to be considered when opening the LCD screen mold? Here are three issues to pay attention to:
1. Consider the temperature range
Temperature is an important parameter of LCD displays. When the LCD screen is opened, the operating temperature and storage temperature cannot be omitted from the manufacturer's design drawings. If the selected temperature range is incorrect, the reaction will be slow in low temperature environments and shadows will appear in high temperature environments. Therefore, the working environment and required temperature range of the product must be carefully considered when opening the mold.
2. Consider display mode
When opening molds for LCD displays, the display mode needs to be fully considered. Because the display principle of the LCD screen does not emit light and requires a lower backlight to see clearly, positive display mode, negative display mode, full transmission mode, translucent mode and combinations of these modes are derived. Each display method has its own advantages and characteristics, and the applicable usage environments are also different.
3. Consider the visual range
The visual range refers to the area where the image can be displayed on the LCD screen. The larger the area, the more beautiful and grand the graphics that can be displayed. On the contrary, graphics displayed in a smaller visual range are not only small, but also difficult to see clearly. Therefore, when looking for a well-known LCD display mold manufacturer to open a mold, you must consider how much visual range is required based on the actual situation.
The above issues need to be carefully considered when opening molds for LCD displays. Therefore, no matter what product needs to be customized, if you want to obtain a high-quality LCD mold opening effect, you must not only find a professional and reliable mold manufacturer, but also think through various issues to ensure that the various requirements of the product are met.