Usually, some customers worry about the touch problem when leaving the mold segment LCD screen. In the past, the plan they chose was to open another touch screen, but in that case, the structure would usually become thicker and thicker, which would also cause damage to the actual effect. Under such circumstances, the segmented LCD screen with built-in touch came into being. What should you pay attention to when using a segmented LCD screen with built-in touch? What are the frequently asked questions?
The segment code LCD screen with built-in touch is called double-sided ITO processing technology in our field. To put it simply, it is to add a conductive layer to the surface of the LCD screen and follow the etching processing route on the conductive layer (touch functionality). At this stage, many customers have already adopted this type of product. So, what are the common problems in the application of this type of product?
Although this screen has a built-in touch function, it is different from professional touch screens. Judging from the actual effect of touch, there is no doubt that it is not as smooth as professional touch screens.
Secondly, since the surface is made of a conductive layer to complete the touch, you should try your best to avoid extrusion and scratches on the surface of the LCD screen during use. Of course, we can also use the control panel for maintenance, but the thickness must not be too thick to avoid endangering the actual touch effect.
Finally, and most importantly, in what environments can this segmented LCD screen with touch be used? Every time users touch this type of screen, they will carefully understand the environment in which it is used. So far, most users of this type of product are used in consumer products, rather than industrial production products, because the basic principle of this kind of touch is similar to the basic principle of capacitor touch. When the surrounding influence is too large, it is likely to cause product operation errors. Therefore, even if you want to use it, you must do a good job in the physical touch screen switch function. Of course, in an industrial environment, we do not promote this kind of product. Letting customers rest assured is our ultimate goal.
